manualshive.com logo in svg

Canon GP200, Service Manual, Page: 39 / 458

Share
Download
Canon GP200 Service Manual Download Page 39

V. ROUTINE WORK BY

THE USER

Advise the user to clean the following at leas

once a week:
1) Copyboard Glass

Wipe it with a moist cloth; thereafter, dry wipe
it.

2) Copyboard Cover/RDF Feeding Belt

Wipe them with a cloth moistened with a solu-
tion of mild detergent; then, dry wipe them.

Advise the user to perform the following when

image faults (e.g., vertical white spots) are noted:
1) Clean the charging roller and the transfer

roller in user mode.

2) Clean the separation static eliminator.

1–29

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

1. GENERAL DESCRIPTION

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments