manualshive.com logo in svg

Canon GP200, Service Manual, Page: 388 / 458

Share
Download
Canon GP200 Service Manual Download Page 388

3. Setting the Dialing Type (for model with FAX function only)

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

5–20

5. INSTALLATION

No.

1

2

3

4

5

6

Work

Turn ON the main power switch.

Press the User Mode key, and press 'FAX
spec settings' on the screen that has
appeared.

Press 'Basic Registration'.
• The Basic Registration Setting screen

appears.

Press the 

▼

key to open the 2/3 screen;

then, press 'Selecting 
Line Type'.

Select the appropriate telephone line type,
and press the OK key.

Press the 'Close' key several times to return
to the Standard screen.

Remarks

•

20 pps

•

10 pps

•

Touch tone

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments