Canon GP200 Service Manual Download Page 354

Page: 354 / 458

4–28

4. MECHANICAL SYSTEM

Caution:
The scanning lamp has its own orientation.
Observe the following when installing it:
1. Make sure that the manufacturer’s name

is toward the rear of the machine.

2. Keep the transparent side of the lamp

toward the reflecting plate.

3. Do not touch the transparent side of the

lamp.

Figure 4-505

8) Execute ‘R&D SHADING’ (12th screen) in

service mode (*3*; ADJUST). (shading for
R&D and factory)

B. CCD Unit

1. Removing the CCD Unit

1) Disconnect the power plug.
2) Remove the copyboard glass.
3) Remove the CCD unit cover

Figure 4-506

4) Remove the screw, and remove the original

size sensor

to keep it away from the CCD

unit.

Figure 4-507

Reflecting plate

Transparent side of
the lamp

Summary of Contents for GP200









































































































































































































































































































































































































































Search results

Summary of Contents for GP200

Reviews:

Canon GP200, Service Manual, Page: 354 / 458

Search results

Summary of Contents for GP200

Reviews: