manualshive.com logo in svg

Canon GP200, Service Manual, Page: 348 / 458

Share
Download
Canon GP200 Service Manual Download Page 348

2. Removing the Feeding Fan

1) Remove the feeding assembly.
2) Remove the screw, and remove the transfer

charging roller unit from the feeding assembly.

3) Remove the three bushing 

q

and the gear 

w

by disengaging the hooks.

4) Remove the screw, and remove the static

eliminator 

e

.

5) Remove the feeding fan assembly 

r

from the

mount in the direction of the arrow.

Figure 4-414

6) Disconnect the connector 

t

, and remove the

feeding belt 

y

as if to displace it.

Figure 4-415

7) Release the hook assembly 

i

of the feeding

fan cover 

u

with a small flat-blade screwdriver.

8) Remove the feeding fan 

o

.

Figure 4-416

7

8

9

5

6

1

1

2

3

4

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

4–22

4. MECHANICAL SYSTEM

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments