Canon GP200 Service Manual Download Page 334

Page: 334 / 458

III. DRIVE ASSEMBLY

A. Scanner Drive Assembly

1. Removing the Scanner Drive

Motor

1) Remove the four screws, and remove the rear

cover.

2) Remove the three screws, and remove the fly-

wheel.

3) Remove the four screws

and the spring

;

then, remove the scanner drive motor

Figure 4-301

2. Removing the Scanner Cable

1) Remove the following:

• Copyboard glass
• Control panel
• Rear cover, upper rear cover, right cover,

left cover

2) Remove the metal fixings

(front, rear) of

the scanner cable.

Figure 4-302

3) Remove the two screws

, and release the

cable spring stay

(front, rear).

Figure 4-303

4–8

4. MECHANICAL SYSTEM

Summary of Contents for GP200









































































































































































































































































































































































































































Search results

Summary of Contents for GP200

Reviews:

Canon GP200, Service Manual, Page: 334 / 458

Search results

Summary of Contents for GP200

Reviews: