manualshive.com logo in svg

Canon GP200, Service Manual, Page: 41 / 458

Share
Download
Canon GP200 Service Manual Download Page 41

1–31

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

1. GENERAL DESCRIPTION

B. Safety of Toner

Toner is a non-toxic material consisting of

plastic, iron, and small amounts of dye.

If toner comes into contact with the skin or

clothing, remove it with dry tissue and wash with
water.

Do not use hot water, as such will turn the

toner into gel and cause it to fuse with the fibers
of the cloth. Further, do not bring toner into con-
tact with plastic material, as such will initiate
chemical reaction.

Caution:
Do not dispose of toner in fire. It may
explode.

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments