manualshive.com logo in svg

Canon GP200, Service Manual, Page: 337 / 458

Share
Download
Canon GP200 Service Manual Download Page 337

4. Setting the Mirror Positioning Tool

Use the mirror positioning tool FY9-3009-040 by changing its pin arrangement for the machine.
Refer to the figures for the correct order; 

q

, 

w

, and 

e

indicate the positions of the pins and 

A

, 

B

,

and 

C

indicate the pins.

Figure 4-306 (FY9-3009-040)

Figure 4-307

(arranged for the front of the machine)

1) Relocate the pins of the mirror positioning tool so that it may be used for the machine.

Figure 4-308

Note:
The pin 

A 

of the mirror positioning tool (FY9-3009-040) will not be used for the machine.

1

1

2

3

Attach the
longest pin
to 

3

Attach the
shortest pin
to 

<Front>

<Rear>

1

2

3

A

B

C

4–11

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. MECHANICAL SYSTEM

C

B

3

2

1

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments