manualshive.com logo in svg

Canon GP200, Service Manual, Page: 393 / 458

Share
Download
Canon GP200 Service Manual Download Page 393

Caution:
Perform the following adjustments (“Shading Adjustment” and “Automatic Density Adjustment”) only
if the copy images are not optimum.

1. Shading Adjustment

5–25

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

5. INSTALLATION

Work

Start service mode, and execute
shading.

Press the service switch with a
hex key.

Press the * key twice.

Press ‘FUNCTION’ (*4*) on the
LCD to highlight; then, press
the OK key.

Press the

key to turn

pages to the Shading screen.

Press ‘AUTO SHADING
START’ on the LCD to high-
light.

Press the OK key.
• Shading will be executed.
• Shading will end when ‘Now

[END

]’ appears.

Remarks

Start service mode.
• Open the front door.
• Insert the handle of the static eliminator cleaning brush

into the fixing assembly releasing assembly.

• Turn ON the door switch with the door switch actuator.

No.

1

CANCEL

+

OK

*4* FUNCTION 03 

AUTO SHEADING START (OK)

WB  xxxxH  WP  xxxxH  LAMP  xxxxH
GDA1  xxH  GD2  xxH    CDA3    xxH
CDA4  xxH  ADDA5  xxH
D-ODD  xxH  D-EVN  xxH

Now [xxxxxxxxxxxxx]

–

Summary of Contents for GP200











































































































































































































































































































































































































































































Reviews:

No comments