Canon FAX-L220, User Manual

Page: 170 / 202

144 Summary of Settings Chapter 14
USER SETTINGS Menu
For details on accessing the settings below, see p. 143.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description SubSettings
DATE & TIME
Sets the current date and time ( p. 36).
–
UNIT TELEPHONE #
Enters the fax/telephone number you want to appear at the
top of each fax page you send (
p. 36).
–
UNIT NAME
Enters the name or company name you want to appear at
the top of each fax page you send (
p. 36).
–
TX TERMINAL ID
Enables/disables printing of the sender information
(
p. 35).
ON
OFF
TTI POSITION
Selects whether the sender information is positioned
inside or outside the image area (
p. 35).
OUTSIDE IMAGE
INSIDE IMAGE
TELEPHONE # MARK
Selects the prefix for the unit number ( p. 35).
FAX
TEL
SCAN CONTRAST
Selects the scanning contrast ( p. 73).
STANDARD
DARKER
LIGHTER
OFFHOOK ALARM
Enables/disables the off hook alarm that alerts you that
the handset is not seated properly in its cradle.
ON
OFF
VOLUME CONTROL
Sets the volume of the FAX sounds.
–
CALLING VOLUME
Selects the ring volume when the FAX detects a voice
call.
1/2/3
KEYPAD VOLUME
Selects the keypad touch beep volume.
0 (off)/1/2/3
ALARM VOLUME
Selects the error alarm volume.
0 (off)/1/2/3
LINE MONITOR VOL
Selects the line monitor volume (sound during dialling).
0 (off)/1/2/3
RX CALL LEVEL
Selects the ring type for incoming calls.
HIGH
STANDARD
TEL LINE TYPE
Selects the telephone line type setting for your FAX
(
p. 38).
TOUCH TONE
ROTARY PULSE
R-KEY SETTING
Enables dialling through a switchboard.
If you select PBX, you can select additional subsettings
(
p. 39).
PSTN
PBX