Canon FAX-L220 User Manual Download Page 17

Page: 17 / 202

Setting Up

Chapter 2

Set

If any items are damaged or missing, notify your local authorised Canon dealer or the
Canon help line immediately.

Removing Shipping Materials

Follow this procedure to remove the shipping materials. Keep them in case you need
to transport the unit in the future.

•

Important! Save your sales receipt for proof of purchase in case your unit requires
warranty service.

•

If you have purchased the optional handset, see Appendix C for the items included.

The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.

Remove all shipping
tapes from the FAX.

Use both hands to
gently open the
operation panel (it
only opens partially).
Then remove the
protective sheet from
the ADF.
Close the operation
panel by pressing it
down from the centre
until it locks into
place.

Summary of Contents for FAX-L220











































































































































































































Search results

Summary of Contents for FAX-L220

Reviews:

Brands by name

Popular brands

Canon FAX-L220, User Manual

Search results

Summary of Contents for FAX-L220

Reviews:

Brands by name

Popular brands