Canon FAX-L220, User Manual

Page: 173 / 202

147 Summary of Settings Chapter 14
Su
mm
ary
of
Set
ti
ng
s
RX (Reception) SETTINGS Menu
For details on accessing the settings below, see p. 143.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description SubSettings
ECM RX
Enables/disables Error Correction Mode (ECM) during
reception.
ON
OFF
RX MODE
Selects the receive mode ( Chapter 8).
If you select FAX/TEL AUTO SW , you can select
additional subsettings ( p. 84).
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
INCOMING RING When the RX MODE setting is set to FAX ONLY
MODE or FAX/TEL AUTO SW , this setting enables/
disables ringing when the FAX receives a call.**
OFF
ON
RING COUNT
Selects the number of rings before the FAX begins
receiving.
2 TIMES
(1
to
99)
MAN/AUTO SWITCH
When the receive mode is set to MANUAL MODE , this
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
OFF
ON
F/T RING TIME
If you select
ON
above, this setting selects the length of
time the FAX rings before switching to fax receive mode.
15 SEC
(1
to
99)
REMOTE RX
Enables/disables remote receiving.
ON
OFF
REMOTE RX ID If you select ON above, this setting selects the remote
receiving ID.
25
(00
to
99)
MEMORY RX
Enables/disables reception of a document in the FAX’s
memory when a problem occurs during reception.
ON
OFF
RX PAGE FOOTER
Enables/disables printing of the reception date and time,
page number, and transaction number (TX/RX NO.) at the
bottom of each received fax page.
OFF
ON
* This setting is available for certain countries only.
** Even if you have set INCOMING RING to ON , ringing will only occur if you have connected the optional
handset or a telephone to your unit.