Canon FAX-L220 User Manual Download Page 60

Page: 60 / 202

Speed Dialling

Chapter 6

Use the numeric buttons to enter the fax/
telephone number you want to register (max.
120 digits, including spaces and pauses).

•

To enter a space, press

Function

then

Space

. Spaces are optional and are

ignored during dialling.

•

To enter a pause, press

Redial/Pause

(

p. 92).

•

To correct a mistake in the number,
press

to delete the rightmost digit.

Alternatively, press

to delete the entire

number.

•

To cancel onetouch speed dialling for
the button you selected, press

then

Press

Stop

to return to standby mode.

The fax/telephone number and name
registered under that button will be
deleted.

•

If you have already registered a number
that you want to keep, ignore this step.

Press

twice.

Use the numeric buttons to enter a name for
the onetouch speed dialling button (max. 16
characters, including spaces).
•

If you are unsure how to enter characters,
see p. 32.

•

If you have already registered a name that
you want to keep, ignore this step.

Press

TEL=20 545 8545_

Ex:

DATA ENTRY OK

NAME

Ex:

Canon EUROPA

Ex:

DATA ENTRY OK

OPTIONAL SETTING

Summary of Contents for FAX-L220











































































































































































































Search results

Summary of Contents for FAX-L220

Reviews:

Brands by name

Popular brands

Canon FAX-L220, User Manual

Search results

Summary of Contents for FAX-L220

Reviews:

Brands by name

Popular brands