Canon FAX-L220 User Manual Download Page 83

Page: 83 / 202

Sending Faxes

Chapter 7

g Fa

xes

■

If you hear a highpitched signal instead of a voice:

■

If you hear a voice:

Dial the other party’s fax/telephone number.

•

For dialling methods, see p. 74.

•

If you make a mistake during dialling,
press

Hook

or hang up the handset and

start again from step 3.

Press

Start/Copy

to begin sending the document.

If you picked up the handset to dial, press

Start/Copy

and hang up.

Pick up the handset and start your conversation.

•

If you pressed

Hook

instead of lifting the handset in step 3, you will hear

the other party’s voice but they will not be able to hear you through the
speaker. Pick up the handset to talk to the other party.

When you are ready to send your document, ask the other party to press the
start button on their fax machine.

When you hear the highpitched signal of the other party’s fax machine, press

Start/Copy

and hang up to begin sending the document.

•

If using the handset, be sure to hang up after you press

Start/Copy

on the FAX,

otherwise the call will be disconnected.

•

The FAX will alert you by beeping if the handset is not hung up properly. Make sure
the handset is seated properly in its cradle. If you do not want the FAX to beep, disable
the OFFHOOK ALARM setting (

p. 144).

TEL=

7654321

Ex:

Summary of Contents for FAX-L220











































































































































































































Search results

Summary of Contents for FAX-L220

Reviews:

Brands by name

Popular brands

Canon FAX-L220, User Manual

Search results

Summary of Contents for FAX-L220

Reviews:

Brands by name

Popular brands