Canon FAX-L220 User Manual Download

Page: 19 / 202

Setting Up

Chapter 2

Set

Making Connections

Connecting the Telephone Line Cord and External
Devices

Your FAX has three jacks on the side for connection of the following:
•

Telephone line cord

•

Optional handset or telephone

•

Additional telephone, answering machine, or data modem

If you only have one telephone line and plan to use your FAX for receiving both faxes
and voice calls, you will need to connect the optional handset, a telephone, or an
answering machine to your unit.

Follow this procedure to connect the telephone line cord and external device(s):

Be sure to connect any external device before using your FAX.

Connect the supplied
telephone line cord to
the

jack, then the

other end to the
telephone line jack on
your wall.

Connect the optional
handset or telephone
cord to the

jack.

Connect the additional
telephone, answering
machine, or data modem
cord to the

jack.

Summary of Contents for FAX-L220











































































































































































































Search results

Summary of Contents for FAX-L220

Reviews:

Related manuals for FAX-L220

Brands by name

Popular brands

Canon FAX-L220, User Manual

Search results

Summary of Contents for FAX-L220

Reviews:

Related manuals for FAX-L220

Brands by name

Popular brands