Canon FAX-L220 User Manual Download Page 162

Page: 162 / 202

1318

Troubleshooting

Chapter 13

Telephone Problems

■

Cannot dial.

The telephone line cord may not be connected properly.

•

Make sure it is connected properly (

p. 25).

The power cord may not be plugged in securely.

•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 27). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on.

The FAX may not be set for the correct telephone line type.

•

Make sure the FAX is set for the correct telephone line type (

p. 38).

■

Optional handset or telephone disconnects while you are
talking.

The power cord may not be plugged in securely.

•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 27). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on.

The optional handset or telephone cord may be defective.

•

Check the cord by substituting with another cord.

Printing Problems

■

Alarm light is lit and the FAX beeps while printing.

The FAX may have a paper jam.

•

Clear the paper jam (

p. 133).

•

If the FAX has no paper jam, unplug the unit and wait 5 seconds, then plug
it back in. If the Alarm light remains lit, contact your local authorised Canon
dealer or the Canon help line.

■

Nothing prints.

The power cord may not be plugged in securely.

•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 27). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on.

Summary of Contents for FAX-L220











































































































































































































Search results

Summary of Contents for FAX-L220

Reviews:

Related manuals for FAX-L220

Brands by name

Popular brands

Canon FAX-L220, User Manual

Search results

Summary of Contents for FAX-L220

Reviews:

Related manuals for FAX-L220

Brands by name

Popular brands