Canon CXDI-55C, Service Manual

Page: 66 / 186

2. Installation
50
(10) Network Connections
Network settings
1) Purpose
These settings are for connecting the CXDI to the network.
1-1) Set the CXDI’s IP address, subnet mask and default gateway in Windows XP.
1-2) Set the printer and storage output destinations and parameters on the user screen.
2) Checkpoints
2-1) This item involves checking the details of the checks performed on network setting
parameters among the pre-installation inspection details and setting these parameters.
* Refer to “Appendix: Investigation Report” for the pre-installation investigation
details.
2-2) Perform the settings of this item carefully since any errors made in these settings will
make it impossible for connection to be made to the network or the images to be
transmitted properly, etc.
3) Windows XP settings
3-1) Connect the keyboard and mouse to the control computer.
3-2) After turning on the Operation unit’s power and then the Control computer’s power,
start Windows XP.
3-3) The Windows XP desktop screen appears. Right-click the [My Network] icon, and
select My Network Places from the menu.
3-4) When [Network Connection] appears, double click on Local Area Connection (Intel
(R)
PRO/1000 MT Network Connection).
3-5) When Local Area Connection Properties appears, click on the General tab, select
[Internet Protocol (TCP/IP)], and click Properties.
3-6) Based on the pre-install of inspection details set the IP address, subnet mask and
default gateway.
[Fig 1]