manualshive.com logo in svg

Canon CXDI-55C, Service Manual

Share
Download
Canon CXDI-55C Service Manual Download Page 102

2. Installation

 

86 

 

(13) Changing the Total Image Count 

1) Purpose

 

When the imaging unit is replaced (including the replacement of the LANMIT) for 
servicing, the total image count displayed on the user screen can be returned to “0”if 
necessary. 

2) Notes 

2-1)  The CXDI is connected by the system. 

2-2)  Set the CXDI software so that it does not start up. 

2-3)  Files are overwritten, and so be careful when performing the procedure. 

2-4)  As an extra precaution, write down the numerical values before overwriting them. 

2-5)  The overwritten counter becomes valid the next time that the CXDI software is started 

up. 

3) Procedure 

3-1)  Turn on the control computer, and then start up Windows XP. 

3-2)  Right click on My Computer on the Desktop screen of Windows XP, and open 

Explorer.

 

3-3)  A file called “ExpResult.ini” is contained in the CCR folder. 

Open this file. (D:\CCR\ExpResult.ini) [Fig 1] 

 

[Fig 1] 

Summary of Contents for CXDI-55C



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands