Canon CXDI-55C, Service Manual

Page: 185 / 186

Page 1 of 2
CXDI-60G/60C Inspection Check Sheet
< I n s p e c t i o n I t e m s >
ITEM Category NO Item Characteristics values Test means Record
1 Grid installation
It must be possible to
install and remove the
grid smoothly, and the
grid must securely lock
and unlock.
Touch
2
Grid/no grid
detection
Whether the grid is
present or not must be
properly detected.
Visual check
3 Sensor cable
The cable must not be
flattened or twisted and
its covering must not be
damaged.
Visual check
4
Sensor cable
relay connector
The connector must be
connected securely,
and there must be no
play.
Visual check,
touch
Side panel right
Side panel left
Bottom panel
right
5 Shock sensor
The sensor must detect
shocks and not turn red.
Bottom panel left
6 Firmware version - Visual check Ver.
7 PLD code version - Visual check
Ver.
1 Imaging unit
8
Imaging unit IP
address
- Visual check
1 Connector
The connector must be
connected securely.
Visual check,
touch
2 Power switch
It must be possible to
set this switch to its ON
and OFF positions
properly.
Visual check,
touch
3 POWER LED
The LED must light
when the power is on.
Visual check
The LED must not light
when the power is on.
2 Power box
4 ERROR LED
The LED must light
when the power is on
while the sensor cable
is disconnected from
the detachable
connector.
Visual check
1 Remote switch
It must be possible to
set this switch to its ON
and OFF positions
properly.
Visual check
2
POWER LED
(Power Box must
be turned on.)
The LED must light
when the power is on.
Visual check
The LED must not light
when the power is on.
Visual check
3 Remote switch
3
ERROR LED
POWER LED
(Power Box must
be turned on.)
The LED must light
when the power is on
while the sensor cable
is disconnected from
the detachable
connector.
Visual check
4 Control PC 1 Connector
The connector must be
connected securely.
Visual check,
touch