Canon CXDI-55C, Service Manual

Page: 19 / 186

2. Installation
3
4 Product Configuration
4.1 Product Configuration List
1) CXDI-60G/60C
No. Item Name Qty Remarks
1 CXDI-60G/60C Imaging Unit 1
with 1.5 m sensor cable
S150-60 ( imaging unit side)
2 Sensor cable P630 (power box side) 1 6.3m
3 Operation manual (for imaging unit)
4 Attached documents for medical (JPN)
5 Warranty registration (JPN)
6 Warranty card (US)
7 German Security leaflet/WEEE leaflet (EU)
2) CXDI SYSTEM II
No. Item Name Qty Remarks
1 Power Box 1
2 X-ray I/F cable 1 20m
3 Remote switch 1 20m
4 Power supply cable (with AC plug) 1 3m (100/120/230V)
5 Operation manual (for power box)
3) Sensor Cable (Optional)
No. Item Name Qty Remarks
1 Sensor Cable P630-PM (Panel mount type) 1 6.3m
2 Sensor Cable P70-60 (imaging unit side) 1 0.7m
3 Sensor Cable SP780-60 (Straight type) 1 7.8 m
LAN cable for connecting Control Computer / Power Box and Network switch (Switching HUB)
for connecting the multiple Imaging Units shall be procured at each sales company.
- LAN cable (Over category 5)
Recommended length of the cable is 30m or less.
When Control Computer and Power Box are connected directly, Cross type is used, but when
they are connected via Network switch, Straight type is used. However, this is not applied
when Network switch has AUTO-MDI/MDI-X function*.
- Network switch (Switching HUB)
Sales companies adopt Network switch (Switching HUB) after conducting the test and the
operation check for Switching HUB that meets the general standard.