Canon CXDI-40G COMPACT, Service Manual

Page: 125 / 189

2
2
.
.
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
- 105 -
4-6) When Setting Mode (0: Normal, 1: Expert) [0=0x0]: appears, select “0: Normal.”
4-7) When CCR SETUP MENU appears, select “7 Scan Sensor Setup”.
4-8) When Capture Device Configuration Table appears, enter the number of sensor to
which make the “Max Capture Device” recognized.
4-9) The dummies of “A/D Board Serial Number” are appeared: Enter the sensor serial
number for necessary type.
------A/D Board Serial Number 0 0 -> 50G : 0x199
------A/D Board Serial Number 0-1 -> 12 : 0x2009
------A/D Board Serial Number 0-2 -> 31 : 0x3002
------A/D Board Serial Number 0-3 -> 40G : 0x123
For example, when the upright stand model is connected to Sensor 1, and the 50G
cassette 14x17 connected to Sensor 2:
Enter “ 123 ” for “A/D Board Serial Number for Sensor ID#1”
Enter “ 199 ” for “A/D Board Serial Number for Sensor ID#2”
The CXDI application can now be launched on the control PC with the same conditions
in effect as if an imaging unit were connected.
@@@@@@@@ Capture Device Configuration Table @@@@@@@@
Max Capture Devices [2 = 0x2] :
2 <= Number of imaging units to be connected.
@@@@@@@@ Capture Device Configuration No.0 (SensorID#1 OPU)@@@@@@@@
------A/D Board Serial Number 0-0 -> 50G : 0x199
------A/D Board Serial Number 0-1 -> 12 : 0x2009
------A/D Board Serial Number 0-2 -> 31 : 0x3002
------A/D Board Serial Number 0-3 -> 40G : 0x123
A/D Board Serial Number for SensorID#1 [0x7900005 = 126877701] : 123
Custom Type[0:NO CUSTOM 1:STAND 2:TABLE 3:UNIV 4:CASSETTE 100um
5:CASSETTE 14X17_160um 6:CASSETTE 9X11_160um] [0 = 0x0] : 0
Field of View Rotation(0:No 1:Yes) [0 = 0x0] : 0
Constant for Exposure Index [1.800000] : 1.800000
@@@@@@@@ Capture Device Configuration No.1 (SensorID#2 OPU) @@@@@@@@
------A/D Board Serial Number 0-0 -> 50G : 0x199
------A/D Board Serial Number 0-1 -> 12 : 0x2009
------A/D Board Serial Number 0-2 -> 31 : 0x3002
------A/D Board Serial Number 0-3 -> 40G : 0x123
A/D Board Serial Number for SensorID#2 [0x10000004 = 268435460] : 199
Custom Type[0:NO CUSTOM 1:STAND 2:TABLE 3:UNIV 4:CASSETTE 100um
5:CASSETTE 14X17_160um 6:CASSETTE 9X11_160um] [0 = 0x0] : 0
Field of View Rotation(0:No 1:Yes) [0 = 0x0] : 0
Constant for Exposure Index [1.800000] : 1.800000
---- Need to re-start program to validate this change.