Canon Color imageCLASS MF8580Cdw, Manual, Page: 26 / 750

Share

Page: 26 / 750

Canon Color imageCLASS MF8580Cdw Manual Download Page 26

0ALJ-009

Preparing Toner Cartridges

The machine comes with toner cartridges installed at the time of purchase. You must remove the sealing tape from the cartridges to use
the machine. Read the precautions in

Maintenance and Inspections

and

Consumables

before preparing the toner cartridges.

Open the front cover.

Pull out the cartridge tray.

MF8580Cdw / MF8550Cdn / MF8540Cdn

MF8280Cw / MF8230Cn

Remove the sealing tape by pulling it straight up while holding down the toner cartridge.

The full length of the sealing tape is approximately 50 cm.

There is a toner cartridge for each of the four colors. Remove the sealing tape from each toner cartridge.

IMPORTANT:
When pulling out the sealing tape

If the sealing tape remains inside the toner cartridge, the quality of printouts, including faxes, may deteriorate. Also note that it
will not be possible to reprint a fax because the fax function automatically deletes data once it is printed.

Do not pull the sealing tape at an angle. If the tape breaks, you may not be able to pull it out completely.

If the sealing tape becomes stuck when pulling it out, keep pulling until it is completely removed.

Push the toner cartridge tray back in.

Close the front cover.

1

2

3

4

5

㻞㻢㻌㻛㻌㻢㻣㻢

Downloaded from ManualsPrinter.com Manuals

«
...
24
25
26
27
28
...
»

Summary of Contents for Color imageCLASS MF8580Cdw















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments