Canon 2200 Series Manual Download Page 77

Page: 77 / 235

Using a Memory Box (Memory Box)

3-7

Special F

ax Functions

Printing or Erasing Documents in a Memory Box

You can print or erase documents stored in a memory box.

Make sure the machine is ready to send

press “Special Features”

press “Memory Box.”

The Memory Box Select screen is displayed.

Press the memory box number you want to use.

Press “

▲

” or “

▼

” if the memory box you want to select is not displayed.

If you want to specify the memory box number using

(numeric keys), press “OK”

after entering the memory box number.

NOTE
•

If the memory box is set with a password, a locked mark

is displayed next to the icon of the

memory box.

•

is displayed for a memory box containing stored documents.

Index.book Page 7 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Canon 2200 Series, Manual, Page: 77 / 235

Search results

Summary of Contents for 2200 Series

Reviews: