Canon 2200 Series Manual Download Page 172

Page: 172 / 235

File Settings

5-58

Setting and Stor

ing Custom F

ax Settings

Enter a name for the Batch Sending Memory Box, and press “OK.”

For instructions explaining how to enter characters, see the

Reference Guide

You can enter up to 24 alphanumeric characters for a memory box name.

NOTE
•

If you make an incorrect entry, press

(Clear), and enter the correct name.

•

Press “Cancel” if you want to cancel storing.

Enter the password using

(numeric keys), and press “Next.”

Enter a password of a one to seven-digit number.

If you do not want to set a password, press “Next” without entering a password.

IMPORTANT

•

There is no method of verifying the set password, so do not forget it.

NOTE
•

If you make an incorrect entry, press

(Clear), and enter the correct password.

Index.book Page 58 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands