Canon 2200 Series Manual Download Page 166

Page: 166 / 235

File Settings

5-52

Setting and Stor

ing Custom F

ax Settings

Enter the password using

(numeric keys), and press “Next.”

Enter a password of a one to seven-digit number.

If you do not want to specify a password, press “Next” without entering a password.

IMPORTANT

•

There is no method of verifying the set password, so do not forget it.

NOTE
•

If you make an incorrect entry, press

(Clear), and enter the correct password.

•

Press “Cancel” if you want to cancel storing.

Select “Subaddress” and “Password”

enter the respective

numbers using

(numeric keys)

press “Next.”

You can store a subaddress and an RX password of up to 20 digits each. You can store
numbers, #,

∗

, and spaces.

To store a space, press “Space.”

To delete the character immediately in front of the cursor, press “Backspace.”

IMPORTANT

•

Be sure to enter a subaddress.

NOTE
•

You can erase entered characters using

(Clear).

•

Press “Cancel” if you want to cancel storing.

Index.book Page 52 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands