Canon 2200 Series Manual Download Page 44

Page: 44 / 235

Selecting the Sending Method

2-12

Basic F

ax Usage

Selecting the Sending Method

This machine can send originals in two ways: Memory Sending and Direct Sending. It is also
possible to stamp sent or scanned originals.

NOTE
•

If a paper jam occurs in the feeder while the original is being scanned, transmission is canceled. To
resend, repeat the faxing procedure.

■

Memory Sending
Sends the documents after they have been scanned into the machine’s memory.

■

Direct Sending
Sends the documents directly, without storing the data in the machine’s memory.

Sending an Original After It Has Been Scanned (Memory
Sending)

All of the originals to be sent are first scanned and read into memory, then sent.

This means that you do not need to stay near the machine once the originals have been
scanned.

Memory sending takes place unless direct sending is specified.

NOTE
•

The memory can hold a total of about 3700 pages for sending and received documents.

•

If the memory becomes full, delete unwanted received documents using the System Monitor screen.
(See Chapter 4 ‘Checking and Changing the Fax Status.’)

Place your originals.

For instructions explaining how to set the original, see ‘Sending an Original,’ on p. 2-7.

Index.book Page 12 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands