Canon 2200 Series Manual Download Page 24

Page: 24 / 235

Things You Must Do Before Using This Machine

1-8

Bef

ore

ou Use the F

ax Functions

Press “Done.”

The specified mode is set.

Press “Done” repeatedly until the Fax Basic Features screen appears.

Setting the Current Date and Time

You can set the current date and time. The date and time set here is also used as the time
setting when required for functions.

- GMT

: The time at the Greenwich Observatory in England is called GMT

(Greenwich Mean Time).

- Time Zone

: The standard time zones of the world are expressed globally in

terms of the difference in hours (± up to 12 hours) from GMT (± 0
hours). A time zone is a region throughout which this time
difference is the same.

- Daylight Saving Time : In some countries, time is advanced throughout the summer

season. The period in which this is applied is called <daylight
saving time>.

Call up the desired screen as follows:

Enter the current date (month, day, year) and time with

(numeric keys).

Enter the date, and the time in 24-hour clock as four digits without a space.

Enter all four digits for the year ranging from 2000 to 2038.

Examples: MAY 6

→

0506

7:05 a.m.

→

0705

11:18 p.m.

→

2318

(Additional Functions)

Date & Time Settings

Index.book Page 8 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands