Canon 2200 Series Manual Download Page 162

Page: 162 / 235

File Settings

5-48

Setting and Stor

ing Custom F

ax Settings

Select “Subaddress” and “Password”

enter the respective

numbers using

(numeric keys)

press “OK.”

You can store a subaddress and an RX password of up to 20 digits each. You can store
numbers, #,

∗

, and spaces.

To store a space, press “Space.”

To delete the character immediately in front of the cursor, press “Backspace.”

IMPORTANT

•

Be sure to enter a subaddress.

NOTE
•

If you make an incorrect entry, press

(Clear), and enter the correct subaddress or

password.

•

Press “Cancel” if you want to cancel storing.

Press “Done.”

The specified mode is set.

Press “Done” repeatedly until the Fax Basic Features screen appears.

Index.book Page 48 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands