Canon 2200 Series Manual Download Page 140

Page: 140 / 235

Storing Various Dialing Functions

5-26

Setting and Stor

ing Custom F

ax Settings

Enter the name of the One-touch Speed Dialing key, on the touch
panel, and press “OK.”

For instructions explaining how to enter characters, see the

Reference Guide

You can enter up to 12 alphanumeric characters for a One-touch Speed Dialing key name.

You cannot press “OK” without entering at least one character for the name of the One-
touch Speed Dialing key.

The directory where the destination is stored appears.

The initial of the One-touch Speed Dialing key is automatically displayed under it.

NOTE
•

You can erase characters (numbers) by pressing

(Clear).

•

The initial is used to specify where to store the One-touch Speed Dialing key in alphabetical
order.

Press “Done.”

Press “Done” repeatedly until the Fax Basic Features screen appears.

Index.book Page 26 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands