Canon 2200 Series Manual Download Page 56

Page: 56 / 235

Various Dialing Methods

2-24

Basic F

ax Usage

Press “

▲

” or “

▼

” to display the desired destination.

If you want to specify other destinations from the directory, repeat the above steps. (See
‘Specifying Two or More Destinations,’ on p. 2-26.)

The Fax Basic Features Screen reappears, and the telephone numbers and names of the
selected destinations are displayed.

NOTE
•

If you want to display the directory using the One-touch Speed Dialing keys, press “One-
touch.”

Send the document in the usual way.

For details, see ‘Sending a Fax,’ on p. 2-2.

Specifying with Coded Speed Dialing

You can dial the destination by using three digit numbers stored in the One-touch Speed
Dialing of the Directory. You can also dial other Coded Speed Dialing numbers as well, and
send the original to a number of destinations in a single operation.

NOTE
•

To use Coded Speed Dialing, you must first register the destinations. (See ‘Storing Various Dialing
Functions,’ on p. 5-13.)

Place your originals.

For instructions explaining how to set the original, see ‘Sending an Original,’ on p. 2-7.

Index.book Page 24 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands