Canon 2200 Series Manual Download Page 222

Page: 222 / 235

Activity Management Reports and Lists

9-6

Appendix

Memory Box Reception Report

This report enables you to confirm that documents were received in the memory box.

You can set whether or not to automatically print a Memory Box report.

IMPORTANT

•

Documents received in the memory box are not automatically printed.

NOTE
•

The default setting for printing a Memory Box report is “On.” (See ‘Setting Automatic Output of an RX
Report,’ on p. 7-6.)

MAILBOX #

The number of the Memory Box in which the documents were received (#00 to 99) is
printed.

BOX NAME

The name of the Memory Box in which the documents were received is printed.

JOB NO.

The 4-digit number, that is automatically assigned when a receiving document is
accepted, is printed.

DESTINATION
ADDRESS

The telephone number of the sending party is printed to the first 20 digits.

SUBADDRESS

A subaddress is printed if one is specified.

DESTINATION ID

The name of the remote party is printed.

ST. TIME

The date and time (24-hour clock display) at which the documents started to be sent
are printed.

USAGE T

The time taken (minutes and seconds) from start to end of sending is printed.

PGS.

The number of pages of the original that were normally sent to the remote party is
printed.

MAILBOX #
BOX NAME

JOB NO.
DESTINATION ADDRESS
PSWD/SUBADDRESS
DESTINATION ID
ST. TIME
USAGE T
PGS.
RESULT

#06
conf : password1111111

5006

222

03/05 13:53
00’14
1
OK

03/05 2001 MON 13:53 FAX 035 4892 5997

001

✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽

✽ ✽ ✽

✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽ ✽

MEMORY BOX REPORT

CANON

Memory Box Report

Index.book Page 6 Thursday, May 24, 2001 12:30 AM

Summary of Contents for 2200 Series












































































































































































































































Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands

Canon 2200 Series, Manual

Search results

Summary of Contents for 2200 Series

Reviews:

Related manuals for 2200 Series

Brands by name

Popular brands