CAKEWALK Cakewalk SONAR, User Manual, Page: 306 / 610

306
:
Settings
The Settings section is where you map the following for each In Note (source):
• In Note—The source MIDI note value.
• Out Note—The MIDI note value that plays on the destination sound source.
• Name—The user-defined name for the row.
• Chn—The channel on which the note is transmitted.
• Out Port—The hardware output port or software virtual output port to which you are sending the
note.
• Vel+—Apply a velocity offset setting to an individual mapped pitch.
• V Scale—The V Scale value sets a level of compression or expansion. A value below 100% is
compression. A value above 100% is expansion. The Vel+ setting allows for gain make-up.
Ports and Channels
This section lists each unique Port and Channel pairing. This allows you to make quick global changes
that Port and Channel pairing’s bank and patch settings.
Working in the Drum Map Manager
The following table lists several ways of editing settings in the Drum Map Manager.
To do this… Do this…
Audition a row Select the row and press Shift+Spacebar
Sort rows Drag and drop a row to a new location
Select multiple rows Click a row, hold down the Ctrl key while selecting
additional rows
Change the Output Port for all rows with
the same Channel/Port Press Ctrl+Shift while changing the port.
Undo an edit Press the Undo button