manualshive.com logo in svg

CAKEWALK Cakewalk SONAR, User Manual

Share
Download
CAKEWALK Cakewalk SONAR User Manual Download Page 210

210

: 

2.

Right-click on of the clips and select 

Bounce to Clip(s) 

from the popup 

menu.

SONAR combines the selected clips into a single, new clip. 

Take Management and Comping Takes

By default, SONAR stacks any overlapping clips on top of each other, but you can 
choose to display them in separate layers (lanes) in the same track. When you 
store clips in separate layers, it’s easy to mute and solo them individually and 
eventually come up with a composite take, with only the best clips playing back. 
You can also mute and solo whole layers.

When you use loop recording, you can store all your takes in the same track, and 
then use the Mute tool or Audition (Selection Playback) to hear only the ones you 
want.

If you enable a track’s Show Layers option, SONAR stores the track’s clips in 
separate layers whenever any of the following happens:

•

You use loop recording in Sound on Sound mode, and choose to store takes in 
a single track.

•

You record over some pre-existing data while in Sound on Sound mode. 

•

You enable the 

Track-Show Layers

 menu option for a track that contains at 

least one overlapping clip.

Note 1

: you can create as many layers as you want.

Note 2

: a multi-layer layer track has only one set of track automation envelopes.

For step-by-step instructions, see the following procedures:

To Enable or Disable the Multi-layer Option

•

For single tracks, you can right-click  the Track Scale, and choose 

Show 

Layers

 from the popup menu, or use the 

Layers-Show Layers

 command on 

the Track pane right-click menu, or click the Track Layers On/Off button.

•

For multiple tracks, select the tracks you want to configure by Ctrl-clicking 
the track number of each track, and use the 

Track-Layers-Show Layers

 

menu option.

When the option is first enabled, SONAR moves all overlapping clips in the 
affected tracks to separate layers, and displays mute and solo buttons on the 
Track Scale for each layer.

Track Scale before showing 
layers

Track Layers On/Off button

Summary of Contents for Cakewalk SONAR



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands