CAKEWALK Cakewalk SONAR, User Manual

Page: 253 / 610

253
Engl
ish
To Edit Notes with the Select Tool
1. If you want to edit multiple notes at the same time, select them with the Select tool. Editing any of
the notes in the selection edits all the selected notes in the same way.
2. Set the Snap to Grid to the desired value (if you’re editing in the Inline Piano Roll view, make sure
you use the PRV tab of the Snap to Grid dialog).
3. Edit notes as described in the table:
To Change Note Properties
1. Right-click a single note to display the Note Properties dialog box.
2. Edit the desired start time, pitch, duration, velocity, or channel.
3. Click OK when you are done.
SONAR updates the note event accordingly. Note that you can also edit note velocity in the Notes pane
and the Event Inspector toolbar. For information on changing note velocities in the Drum Grid Editor,
see “Editing Note Velocities” on page 309. For more information, see “Velocity, Pitch Wheel, and
Aftertouch” on page 288.
To Temporarily Turn off the Auto Erase Button
1. Hold down the Alt key.
2. Make the desired edits.
3. Release the Alt key.
To Scrub the Project
1. Click or press B to select the Scrub tool.
2. Press and hold the left mouse button in the Piano Roll view. SONAR displays a vertical line and
plays any notes that are underneath the line.
3. Drag the line to the left or right, at any desired speed.
Note that the Mute, Solo and Arm buttons do not affect Scrub. If the track is hidden, however, you do
not hear notes in that track.
To do this… Do this…
Change the start time, but not the
duration Drag the note left or right
Change the pitch Drag the note up or down.
Copy and paste notes Hold the Ctrl key down, and drag notes horizontally and/or
vertically, and release the mouse at the desired location.
Delete notes Press the Delete key.