Brother PR1055X Operation Manual Download Page 168

Page: 168 / 200

166

Touch .

• When the background image has already imported,

continue with step

• When the background image has not imported,

continue with step

Position the scanning frame on the machine, and then

touch .



When the message to start scanning appears, touch



Scanning starts.

When scanning is finished, move

to frame the

image for the pattern, and then touch

The screen for confirming the converted image

appears, adjust the image if necessary and then touch



The pattern drawing screen is displayed.

To set the outline of the pattern, touch

, and then

Note

• When scanning starts, some of the machine lights

will turn off in certain circumstances, in order to
increase the scan quality. The machine lights will
return to their original brightness when scanning
ends.

• You can import an image of 2 MB or smaller from

USB media or computer.

Summary of Contents for PR1055X









































































































































































































Search results

Summary of Contents for PR1055X

Reviews:

Related manuals for PR1055X

Brands by name

Popular brands

Brother PR1055X, Operation Manual

Search results

Summary of Contents for PR1055X

Reviews:

Related manuals for PR1055X

Brands by name

Popular brands