![background image](http://html1.mh-extra.com/html/broadcom/brocade-x6-4/brocade-x6-4_installation-manual_2815626023.webp)
53-1004106-15 Installation Guide
Brocade
®
X6-4 Director Hardware Installation Guide
Mounting the Device
You can install the device in several ways.
•
As a stand-alone unit on a flat surface, such as a tabletop.
•
In a four-post 19 in. (48.3 cm) EIA rack:
–
Use the 27-31 inch four-post rail rack mount kit (XBR-DCX4S-0120), which contains 27-31 in. (68.58 to 78.74 cm)
expandable rails.
–
See
Installing the 8U Chassis 27-31-Inch Rail Rack Kit for Four-Post Racks
for instructions.
•
In a four-post 19 in. (48.3 cm) EIA rack using an airflow diversion rack mount kit:
–
Use the 8U Chassis Airflow Diversion and Port Side Exhaust rack mount kit to divert airflow so that it fully exhausts
to the port side of the device or is fully drawn from the port side of the device while mounted in a four-post rack. The
XBR-DCX4S-0121 rack kit is designed for rack rail-to-rail depth of 27 to 31 in. (68.58 to 78.74 cm) depths and the
XBR-DCX4S-0130 kit is designed for 18 to 24 in. (45.72 to 60.96 cm) depths.
–
See
for instructions.
•
In a two-post Telco rack:
–
See
Installing the 8U Chassis Mid-Mount Rack Kit for Two-Post Racks
NOTE
•
Review the following mounting precautions before mounting the device, and ensure that all
are met.
•
The preceding rack mount kits are supported for these devices on the publication date of this guide. For
current support information, contact your Broadcom representative.
Mounting Precautions
The following precautions specifically apply to mounting the device.
NOTE
Be careful to not push on mesh screen covering the side vent on the chassis or poke screen with sharp objects.
CAUTION
Do not use the port cover tabs to lift the module. They are not designed to support the weight of the module,
which can fall and be damaged.
CAUTION
Make sure the airflow around the front and back of the device is not restricted.
DANGER
Mount the devices you install in a rack as low as possible. Place the heaviest device at the bottom and
progressively place lighter devices above.
DANGER
Use safe lifting practices when moving the product.
CAUTION
To prevent damage to the chassis and components, never attempt to lift the chassis using the fan or power
supply handles. These handles were not designed to support the weight of the chassis.
53-1004106-15
23
Summary of Contents for Brocade X6-4
Page 208: ......