53-1004106-15 Installation Guide
Brocade
®
X6-4 Director Hardware Installation Guide
3. Clip or retainer nut locations for shelf
4. Retainer nut for rails with square holes
5. Rail
3. Install the shelf as shown in the following figure.
a) The shelf can be adjusted to a length of between 27 and 31 in. (68.58 and 78.74 cm) to accommodate your rack
size.
To lengthen or shorten the shelf, loosen the four 6-32 screws in the four slots on the shelf and adjust the shelf to
the desired length. Once adjusted, tighten the four 6-32 screws.
b) Secure the shelf to the rack with eight 10-32 screws with washers, two screws in each corner of the shelf (see the
following figure).
Tighten the screws according to specifications under
.
Figure 12: Shelf Installed in Rack
1. Shelf
2. 10-32 x .5 in. (1.27 cm) Phillips screws with blue Loctite on threads or 10-32 x .63 in. (1.60 cm) Phillips
screw with square cone washer for racks that have rails with round holes
4. Install the air duct assembly by inserting it down into the side slot on the shelf.
Ensure that the tabs of the duct align and engage with the slots in the shelf.
53-1004106-15
36
Summary of Contents for Brocade X6-4
Page 208: ......
