install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
1.15.3
11.
In the Drive Backup pop-up window,
click the
Restart the computer
button,
as shown on the right.
This will reboot the system and begin the
restore process. During the restore
process a Paragon screen will appear
showing the overall progress. It is
important not to restart or shutdown the
workstation during this process as data
may be lost.
The restore is now taking place. This
process will take anywhere from 20 to 40
minutes, depending on the amount of
files being restored.
12.
When the restore is complete, the
workstation will automatically reboot.
You are now ready to use your system.
To restore from a bootable DVD:
All Premium workstations come with a bootable DVD that allows you to enter a Linux
partition to launch and restore a Paragon back up. If the workstation fails to boot (or fails
to pass the BIOS screen) because of a virus attack or some other corruption, insert the
DVD labeled
Paragon Recovery CD
that is included in the Accessories box of the
workstation. The system will automatically boot from the DVD and launch a Linux version
of Paragon.
1.
In the DOS launch menu, select
Simple Restore Wizard,
as shown on
the right. You may use the keyboard arrows
and/or mouse.
2.
Click
Enter
on the keyboard.
3.
In the Welcome Wizard screen, click on
the
Next
button.
The following screens will be similar to
the ones described above when restoring
from inside the Paragon software.