install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
4.12.1
12.
Once all your options are selected, on the
main MEM elements PixPad press
[Save
MEM].
If the main MEM PixPad is not visible, press
the [UP] PixButton until visible.
Once select the display will read out that your
memory is saved, similar to as shown below.
To save a ME 1 or ME 2 specific MEM:
1.
In Device Control-A select
[ME 2 MEM]
or in
Device Control-B select
[ME 1 MEM]
, the
device button will illuminate orange, as shown
on the right.
Note that the display will now read out either
ME 1 or ME 2 to signify which M/E MEM you
are controlling, as shown on the right.
2.
Similar to the Overall MEM, on the ME 1 or
ME 2 MEM controls PixPad, press the
[MEM
Save Snap Shot]
PixButton, and a PixPad will
appear where you can select where you want
to save the SnapShot MEM:
For the first unused memory position, press
the
[MEM First Avail]
PixButton.
To edit the current MEM, active in the display,
press the
[MEM Current]
PixButton.
For the next MEM beyond the current one,
press the
[MEM Next]
PixButton.
For a specific number press the
[Numeric
Keypad]
PixButton, and a keypad will appear
on which you can enter the MEM number
desired.
ME 1 & ME 2 Controls
PixPad