install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
1.5.8
3.
Under the blue Router input sources section,
enable the sources which are to be used by placing
a
Check Mark
next to each source under the
Enable column.
Only enable sources which are
going to be used during a particular show. Enabling
sources which are not used in a show will effect the
Multi-View updating.
4.
To have a source monitor window always be locked
to update on the Multi-View, place a
Check mark
next to each source under the
Tied column.
The maximum numbers of sources that can be
tied is 4.
5.
Select the icon type for each input under the
Type
column.
Either
Camera, VTR
or
Other.
This icon
will appear on the display row on each PixButton for
each source.
6.
For each input enter the desired custom name
under the
Name column.
The name entered will
also appear on the display row on each PixButton,
Multi-View and other identifiers.
If you want this name to appear on the PixButtons,
you will need to select the
Options
menu and
select
Use name on live source buttons,
as
shown. If this option is not selected, then only the
input number and icon will appear for all source
PixButtons.
Note:
The last 4 inputs will always be grayed out
and not configurable, since they are connected to
the Slate Output cards.