install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
7.17.5
7.17.5 Controlling a Streamer Group
To start a streamer group:
1.
In Device Control select the
[ViewCast]
PixButton, it will illuminate orange.
2.
Select the desired group in the PixPad
by selecting the
[Group Name]
PixButton, in this example Flash.
The display will show the selected group
and the current state of the group.
3.
Select the
[>]
motion control button, it
will illuminate orange, as shown on the
right.
The display will update with the words
Started
, as shown on the right.
4.
To start more groups, repeat steps 2 & 3
above.
To stop a streamer group:
1.
Repeat steps 1 & 2 above.
2.
Select the
[<]
motion control button, and
as a fail-safe the display will update
asking to select REVERSE again and
the < button will blink up to three times.
To really stop the streamer group select
the
[<]
button again.
The display will change to a Stopping
status to a Stopped status, once the
group has fully stopped.
3.
To stop more groups, repeat steps 1 & 2
above.