install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
Get the desired DVE Box on the preview monitor by executing steps 1 through 5 above
in section 4.5.1.
1.
After selecting a Key Select device button, the Joystick will automatically follow.
To ensure that the Joystick is controlling the correct keyer/device, the selector will
display the selected Keyer, Key 1 to Key 6, as shown below.
If a different device is active, i.e. camera control, push the selector button next to
the Joystick until the keyer icon appears.
2.
The position of the DVE Box may be modified by using the
Joystick
, as follows:
3.
The size of the DVE Box may be modified by twisting the
Joystick.
or
The size may also be changed by pressing the
[Size]
PixButton and using the
Knobs in Device Control-B by twisting the
[1
st
Knob]
for overall size, and the
[2
nd
Knob]
and
[3
rd
Knob]
to individually control width and height respectively.
The numbers refer to pixels (full screen 4x3 NTSC is 720x486 pixels, and PAL is
720x576).
4.5.2 Modifying a DVE Box
Several parameters of the DVE box can be modified including size, position, crop,
border size and border color.
To modify a DVE box:
Left - Right Up - Down Diagonally
4.5.2
Key1 (Ra1, DVE)
Size W:270 H:360