install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
1.
In BPswitcher select the
File
drop down menu, as shown below.
2.
Select the
Capture Still
menu
.
3.
Either select
Program
, to capture a still of what is currently on Program.
4.
Or select
Preview
, to capture a still of what is currently on Preview.
5.
Once captured, a pop-up window will notify you that a still has been successfully
captured. It may take a few seconds for this window to appear.
In result, a file named preview.bmp or program.bmp will be created in the Capture
Folder.
4.15 Capture of Stills
4.15
The Broadcast Pix system can capture a still image of the program output or preview
output. The still image can then be loaded into a still store and used in a production.
4.15.1 To Capture a Still Image
NOTE:
If it is desired to capture more than one still image, it is necessary to rename the file that is saved
to the Capture Folder, since any other captures will overwrite the first one.