3 608 878 300
Tightening Technology |
Bosch Rexroth AG 473
System 350
| 3 608 878 300/2019-03
6.12.2.1
Scan and Work (SaW)
1.
The component arrives at a station. The identifier is read manually via a bar code or applied by a data
carrier that is carried along.
2.
An activity pattern inquiry is sent to the PLUS server based on the identifier.
3.
The PLUS server supplies the appropriate activity pattern and, if necessary, the changed identifier to
the station which converts it into tightening processes with the associated program selection. The
tools of the station are released and machining of the workpiece starts.
4.
After the workpiece has been machined, the station summarizes the machining results for the
workpiece and transmits them to the PLUS server.
Component,
data carrier
Tightening System
350
PLUS-server
2. Request: Activity pattern due to identifier
3. Send: Activity pattern, identifier changed, if necessary
4. Send: Production and quality data (PQD)
1. Read ide
n
tifier
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
