Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Page: 23 / 188

Bosch Video Management System Configuring devices | en 23
Bosch Sicherheitssysteme GmbH Configuration Manual Configuration Client | V3 | 2010.07
4. Type a desired display name, the IP address of an iSCSI device, and the device type and
click OK .
The iSCSI device is added to Scan Wizard.
5. Select an iSCSI device and select the desired VRM, and click Assign to assign the iSCSI
device to the VRM.
Click Next >> .
6. Select the required encoders, select the desired VRM and click Assign to assign them to
the VRM.
The video data of these encoders will be stored on the assigned iSCSI device.
Click Next >> .
7. Type all user names and passwords of the listed device in the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected devices. This is useful when you
repeat the device scan and you want only the new ones to be authenticated.
8. Click Save >> .
Click Finish when you did not select further devices to be scanned.
To scan local storage or live only encoders:
9. Select the desired encoders and click Assign .
The video data of these encoders will be stored on their local storage devices or their
video data will not be stored (live only).
10. Type all user names and passwords of the listed device in the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected devices. This is useful when you
repeat the device scan and you want only the new ones to be authenticated.
11. Click Save >> .
Click Finish when you did not select further devices to be scanned.
To scan VIDOS NVRs:
12. Select the desired VIDOS NVRs.
Click Next >> .
13. Type all user names and passwords of the listed device in the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected devices. This is useful when you
repeat the device scan and you want only the new ones to be authenticated.
14. Click Finish .
6.3 Adding a device
Main window > Devices
You add the following devices to the Device Tree manually because these devices are not
added by a network scan:
– DiBos system
– Analog matrix
For adding a Bosch Allegiant device, you need a valid Allegiant configuration file.
– Bosch Video Management System workstation
A workstation must have the Operator Client software installed.
– Communication device