Bosch LTC 1311/20 FlexiDome I Configuration Manual Download Page 100

Page: 100 / 188

100

en | Devices page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Send Test E-mail

Click to display the

Send Test E-mail

dialog box.

17.15.4

Send Test E-mail dialog box

Main window >

Devices

> Expand

Send Test E-mail

button

Allows you to send a test e-mail.

From:

Type the e-mail address of the sender.

To:

Type the e-mail address of the recipient.

Subject:

Type the subject of the e-mail.

Message:

Type the message.

Send Test E-mail

Click to send the e-Mail.

17.15.5

GSM Settings / SMSC Settings page

Main window >

Devices

> Expand

Allows you to configure the SMS settings of your Bosch Video Management System. On the

Events

page, you can assign an event to a short message. When this event occurs, the system

sends a short message. If the number of entered characters exceeds the highest permitted

number (usually 160), an SMS is divided into multiple parts.

Device:

Select the required COM port where the external modem is connected to. If your computer

has an internal modem, select the corresponding entry.

Speed:

Select the required transfer rate.

Pin: (for GSM device only)

Type the personal identification number for authenticating at the device.

Data format: (for SMSC device only)

Select the required data format. You get the information about the required entry from your

provider.

Unicode (for GSM device only)

Select the check box to enable unicode characters. This reduces the highest number of

permitted characters to 80.

Dial string: (for SMSC device only)

Type the number to connect to the SMSC dial-up provider. You get this number from your

provider.

Summary of Contents for LTC 1311/20 FlexiDome I





























































































































































































Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands

Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands