Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Page: 24 / 188

24 en | Configuring devices Bosch Video Management System
Configuration Client | V3 | 2010.07 Configuration Manual Bosch Sicherheitssysteme GmbH
– Bosch ATM/POS Bridge , ATM device
– Virtual input
– Network monitoring device
– CCTV keyboard
– analog monitor group
– I/O module
– Allegiant CCL emulation
Decoders, encoders, NVR s including VIDOS NVR s, and VRM s are detected by the network scan.
To add a DiBos system:
1. Right-click .
2. Click Add DiBos Recorder .
The Add DiBos System dialog box is displayed.
3. Enter the appropriate values.
4. Click Scan DiBos .
The DiBos system is added to your system.
5. In the displayed message box, click OK to confirm.
To add a Bosch Allegiant device:
1. Right-click and click Add Allegiant .
The Open dialog box is displayed.
2. Select the appropriate Allegiant configuration file and click OK .
The Bosch Allegiant device is added to your system.
Note: You can add only one Bosch Allegiant matrix.
To add a Bosch Video Management System workstation:
1. Right-click and click Add Workstation .
The Add Workstation dialog box is displayed.
2. Enter the appropriate value click OK .
The workstation is added to your system.
To add an analog monitor group:
1. Expand , right-click and click Add Monitor Group .
The Create New Analog Monitor Group dialog box is displayed.
If you already have performed a network scan, and decoders have been detected, there is
already a default analog monitor group available with all detected decoders assigned.
2. Make the appropriate settings.
3. Click OK .
The analog monitor group is added to your system.
NOTICE!
After having added a device, click to save the settings.