Bosch Video Management System
Configuring cameras and recording settings | en
51
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
To configure recording settings:
1.
In the
column of
Continuous Recording
, select the desired stream quality or disable
continuous recording.
2.
In the
column, select a check box to activate audio.
3.
In the
column of
Live/Pre-event Recording
, select the desired stream quality or
select stream 1.
4.
In the
column, select a check box to activate audio.
5.
In the
column of
Motion Recording
, select the desired stream quality or disable
motion recording.
6.
In the
column, select a check box to activate audio.
7.
In the
Pre-event [s]
column, click a cell and type the appropriate time.
8.
In the
Post-event [s]
column, click a cell and type the appropriate time.
9.
In the
column of
Alarm Recording
, select the desired stream quality or disable alarm
recording.
10. In the
column, select a check box to activate audio.
11. In the
Pre-event [s]
column, click a cell and type the appropriate time.
12. In the
Post-event [s]
column, click a cell and type the appropriate time.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
9.5
Configuring recording settings (only VRM and Local Storage)
Main window >
Cameras and Recording
> Click
> Click a
Recording Schedule
tab
(for example
)
Note:
For recording, ensure that the corresponding
VRM
or local storage is properly
configured.
VRM:
Devices
> Expand
>
Local Storage:
Devices
> Expand
>
To configure recording settings:
1.
In the
Recording
column, select
On
.
2.
In the
column, click a cell and select the appropriate stream quality.
3.
Under
Continuous or Prealarm Recording
, in the
Mode
column, select the desired
recording mode.
In the
Quality
column, click a cell to select the stream quality of stream 1.
If you select
Prealarm
as the recording mode, click a cell in the
Duration [s]
column to
select the alarm recording time before the alarm in seconds.
NOTICE!
If pre-event time for motion recording and pre-event time for alarm recording differ, the higher
value is used for both.
If the configured pre-event time would overlap a preceding alarm or motion recording, the pre-
event recording starts after the preceding recording is finished.
Summary of Contents for LTC 1311/20 FlexiDome I
Page 1: ...Bosch Video Management System en Configuration Manual ...
Page 2: ......
Page 187: ......
