Bosch LTC 1311/20 FlexiDome I Configuration Manual Download Page 113

Page: 113 / 188

Bosch Video Management System

Encoders / Decoders page | en

113

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

The camera name facilitates the identification of the remote camera location, e.g. in case of an

alarm. Use a name that makes it as easy as possible to identify the location.

Do not use any special characters in the name. Special characters are not supported and may

cause problems, e.g. play back of recordings. The settings on this page apply to all camera

inputs.

Click

to update the name in the Device Tree.

18.3.2

Display stamping

This function allows you to display important supplementary information in the video image.

These information can be enabled individually.

Camera name stamping

Set the position of the camera name overlay.

Click the item you want to select.

–

Off

No camera name is displayed in the video image.

–

Bottom

The camera name is displayed at the bottom of the video image.

–

Top

The camera name is displayed on the top of the video image.

–

Custom

Enter the position where the camera name is displayed in the video image.

Time stamping

Set the position of the time overlay.

Click the item you want to select.

–

Off

No time and date is displayed in the video image.

–

Bottom

The time and date is displayed at the bottom of the video image.

–

Top

The time and date is displayed on the top of the video image.

–

Custom

Enter the position where the time and date is displayed in the video image.

Alarm mode stamping

If necessary, you can also display milliseconds. This information can be useful for recorded

video images; however, it does increase the processor's computing time.

Click the item you want to select.

–

Milliseconds are displayed on the video image.

–

Off

Milliseconds are not displayed on the video image.

Displayed alarm message

Enter the message to be displayed in case of an alarm. The maximum text length is

31 characters.

Click the item you want to select.

–

In case of an alarm a message is displayed on the video image.

Summary of Contents for LTC 1311/20 FlexiDome I





























































































































































































Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands

Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands