Bosch LTC 1311/20 FlexiDome I Configuration Manual Download Page 34

Page: 34 / 188

en | Configuring devices

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Click

to save the settings.

Click

to activate the configuration.

6.23

Adding a LUN

Main window >

Devices

> Expand

Usually the network scan adds the desired

iSCSI

devices with their targets and

LUNs

automatically. If your network scan did not work correctly or you want to configure your iSCSI

device offline before it is actually integrated into your network, you configure a target in your

iSCSI device and on this target you configure one or more LUNs.

To configure:

Right-click

and click

Add Target

The

Add Target

dialog box is displayed.

Enter the desired target number and click

The target

is added.

Click the new target.

The

LUNs

page is displayed.

Click

Add

The

Add LUN

dialog box is displayed.

Enter the desired LUN number and click

The LUN is added as a new table row.

Repeat this step for each desired LUN.

Notes:

–

To remove a LUN, click

Remove

The video data remains on this LUN.

–

To format a LUN, click

Format

All data on this LUN is removed!

6.24

Formatting a LUN

Main window >

Devices

> Expand

You format a

LUN

to prepare it for the first use.

To configure:

On the

LUNs

page, select the desired LUN and, in the

Format

column, click to check.

Click

Format LUN

Read the displayed message carefully and confirm the message if desired.

The selected LUN is formatted. All data on this LUN is lost.

NOTICE!

All data on the LUN is lost after formatting.

Summary of Contents for LTC 1311/20 FlexiDome I





























































































































































































Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands

Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands