Bosch LTC 1311/20 FlexiDome I Configuration Manual Download Page 96

Page: 96 / 188

en | Devices page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Override recording settings

Select the check box to enable selecting the desired stream for live view. The other one is

used for continuous, motion, and alarm recording for this workstation.

See dual streaming in the glossary.

Enable Forensic Search

Click to enable Forensic Search for this workstation.

Keyboard type:

Select the type of the keyboard that is connected to your workstation.

Port:

Select the COM port that is used to connect your keyboard.

Baudrate:

Select the maximum rate, in bits per second (bps), that you want data to be transmitted

through this port. Usually, this is set to the maximum rate supported by the computer or

device you are communicating with.

Data bits:

Displays the number of data bits you want to use for each character that is transmitted and

received.

Stop bits:

Displays the time between each character being transmitted (where time is measured in bits).

Parity:

Displays the type of error checking you want to use for the selected port.

Port type:

Displays the connection type that is used to connect the CCTV keyboard with the workstation.

17.12.2

Assigned Analog Monitor Groups page

Main window >

Devices

> Expand

Assigned Analog Monitor Groups

tab

Allows you to assign an

analog monitor group

to this workstation. Beforehand you must have

added an analog monitor group in

Assigned Analog Monitor Groups

Select the check box to assign the analog monitor group to this workstation. In the

Options

dialog box, you can configure that all other workstations can also control analog monitor

groups.

Analog Monitor Group

Displays the name of the each analog monitor group.

17.13

Decoders page

Main window >

Devices

> Expand

Allows you to configure decoders.

See

Section 18 Encoders / Decoders page, page 111

for details.

Summary of Contents for LTC 1311/20 FlexiDome I





























































































































































































Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands

Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands